company news about Analysis on the precautions for cutting marble cutting chips

     Marble cutting chips are very common in the processing of marble materials. When it comes to marble cutting chips, there is no need to introduce too much. It is a professional cutting chip for various types of marble and stone. Now we can see it in many places, and it is good in architectural decoration.
     It is mainly used for the cutting of stone. Here we mainly come to understand the correct and efficient cutting. What should I pay attention to?
First of all, we must prepare to cut the marble cutting piece. According to the angle grinder used for the saw blade, the general angle grinder is hand-held, and the common one is the cutting machine bought in the hardware store. After you follow the machine, you must first measure it. The size, cut to the size you need now, and fix the stone plate.
      Water should be added when cutting. There are two purposes for adding water. One can reduce dust flying, and the other can reduce the temperature of the marble cutting blade during cutting, which can increase the service life of the saw blade, and the saw blade will not be affected by temperature. Excessive deformation improves cutting accuracy.
      Install the marble cutting piece with a portable yuan disc cutter to cut from the back of the tile. From the surface of the tile, the square hole is intact but the back is cut through the line. To open a round hole, use a portable element disc cutter to install a marble cutting piece to cut from the back of the tile, and cut a cross in the middle. Just tap into a round hole from the surface.
      Install the marble cutting piece on the cutting machine, adjust the cutting depth, place the artificial marble on the work table, determine the size and start cutting.